Match enclosure, temperature and PoE supply requirements for Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX
Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX brings eight PoE+ field ports and four Gigabit-capable copper uplinks into an extended-temperature metal DIN rail enclosure. The configuration is identified by part number 942170098; its 123 mm x 140 mm x 115 mm dimensions and 1470 g weight are as important to the cabinet plan as the 240 W maximum PoE budget.
Extended temperature does not replace cabinet engineering
Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX is listed for an operating temperature of -40-+70 °C, with metal housing, DIN rail mounting and IP30 protection. These values answer different questions. The temperature range concerns operation at the device location, while IP30 still requires a surrounding installation that provides the protection demanded by dust, moisture and access conditions.
Use the configuration-specific dimensions of 123 mm x 140 mm x 115 mm and weight of 1470 g in the panel drawing. Leave additional space for the six-pin power/signaling terminal, RJ45 plugs and optical patch-cord bends where applicable. Review heat from neighboring equipment and the cabinet's own temperature rise rather than substituting the room temperature for the switch location. For the BRS32-12TX-EEC environment review, retain this evidence with part number 942170098 and the complete ordering code.
Build the PoE load schedule before choosing the power supply
Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX provides eight PoE+ ports and the catalog lists up to 240 W of PoE power. Build the endpoint schedule from actual powered-device data: record the required standard, expected demand, cable path and startup behavior for each connection. The maximum budget is a ceiling for planning, not a statement that every endpoint consumes the same amount.
Add the planned loads, retain design margin and consider simultaneous startup where the endpoint documentation makes it relevant. If the full 240 W is not required, document the accepted smaller load rather than leaving the design implicit. The resulting schedule supports power-source selection, commissioning and later expansion decisions. For the BRS32-12TX-EEC poe review, retain this evidence with part number 942170098 and the complete ordering code.
Hirschmann product reference image used for visual context; the label and complete code remain authoritative for BRS32-12TX-EEC.
| Complete product code | Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX |
|---|---|
| Catalog Type | BRS32-12TX-EEC |
| Part Number | 942170098 |
| Port configuration | 12 Ports in total: 8x 10/100BASE TX / RJ45; 4x 10/100/1000BASE TX / RJ45 ; 8 x PoE(+) Ports (phantom power) ; 1. Uplink: 2 x TX (1000 Mbit/s) ; 2. Uplink: 2 x TX (1000 Mbit/s) |
| Operating voltage | 2 x (48 VDC (PoE)/ 54 VDC (PoE+)) |
| Power consumption | max. 250 W with 240W PoE |
| Operating temperature | -40-+70 °C |
| Housing / mounting / protection | Metal / DIN rail / IP30 |
| Dimensions / weight | 123 mm x 140 mm x 115 mm / 1470 g |
| PoE planning boundary | Eight PoE+ ports; maximum 240 W PoE budget stated in the manufacturer record. |
Metal housing, width and cable clearance affect the panel layout
The EEC version recorded here uses metal housing, measures 123 mm x 140 mm x 115 mm and weighs 1470 g. Use those values rather than the smaller standard-version layout when checking DIN rail space and support. Add clearance for power wiring, twelve network connections and cable bend radius. For the BRS32-12TX-EEC cabinet review, retain this evidence with part number 942170098 and the complete ordering code.
The listed operating range is -40-+70 °C and the enclosure rating is IP30. Review the temperature at the switch location under expected panel loading, while relying on the surrounding enclosure for the required environmental protection. Mechanical strength, ingress protection and temperature are related installation inputs but are not interchangeable ratings. For the BRS32-12TX-EEC cabinet review, retain this evidence with part number 942170098 and the complete ordering code.
Build a fault-finding path from port evidence
Diagnostic functions documented for Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX include copper cable testing, link speed and duplex monitoring, duplex-mismatch detection, link-flap detection, port mirroring, RMON, Syslog, TCPDump and device status indications. Start with the affected physical port and compare it with the commissioned baseline before making broad configuration changes.
A useful service record links an alarm or event to the port destination, recent changes and expected application traffic. Preserve the configuration, port map and normal link observations. When escalation is required, provide timestamps and the evidence already collected; this is more actionable than reporting only that communication was lost. For the BRS32-12TX-EEC diagnostics review, retain this evidence with part number 942170098 and the complete ordering code.
Information to include in a useful quotation request
Send the exact keyword Hirschmann BRS32-08042T2T-TPDY99HHSESXX.X.XX, catalog Type BRS32-12TX-EEC, part number 942170098, quantity and delivery destination. Include the powered-device schedule and accepted PoE budget. State any mandatory management, security, timing or redundancy functions and identify required accessories separately.
Ask the supplier to identify the offered code and scope explicitly. For replacement work, attach a readable nameplate image and the key installed-system details. This creates a quotation that can be compared against the engineering requirement without reducing the request to a generic port count. For the BRS32-12TX-EEC inquiry review, retain this evidence with part number 942170098 and the complete ordering code.
