Calculate the PoE budget and copper port roles for Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX
Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX is a twelve-port BRS32 PoE+ managed switch with eight powered 10/100BASE-TX connections and four 10/100/1000BASE-TX copper uplinks. Part number 942170097 should be reviewed with the endpoint power schedule because the catalog lists up to 240 W of PoE power and a dedicated 48/54 V DC operating-voltage range.
Separate endpoint demand from the switch electronics load
Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX provides eight PoE+ ports and the catalog lists up to 240 W of PoE power. Build the endpoint schedule from actual powered-device data: record the required standard, expected demand, cable path and startup behavior for each connection. The maximum budget is a ceiling for planning, not a statement that every endpoint consumes the same amount.
Add the planned loads, retain design margin and consider simultaneous startup where the endpoint documentation makes it relevant. If the full 240 W is not required, document the accepted smaller load rather than leaving the design implicit. The resulting schedule supports power-source selection, commissioning and later expansion decisions. For the BRS32-12TX poe review, retain this evidence with part number 942170097 and the complete ordering code.
| Complete product code | Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX |
|---|---|
| Catalog Type | BRS32-12TX |
| Part Number | 942170097 |
| Port configuration | 12 Ports in total: 8x 10/100BASE TX / RJ45; 4x 10/100/1000BASE TX / RJ45 ; 8 x PoE(+) Ports (phantom power) ; 1. Uplink: 2 x TX (1000 Mbit/s) ; 2. Uplink: 2 x TX (1000 Mbit/s) |
| Operating voltage | 2 x (48 VDC (PoE)/ 54 VDC (PoE+)) |
| Power consumption | max. 250 W with 240W PoE |
| Operating temperature | 0-+60 °C |
| Housing / mounting / protection | PC-ABS / DIN rail / IP30 |
| Dimensions / weight | 73 mm x 138 mm x 115 mm / 680 g |
| PoE planning boundary | Eight PoE+ ports; maximum 240 W PoE budget stated in the manufacturer record. |
Record both available PoE power and actual connected load
The operating-voltage entry for Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX is 2 x (48 VDC (PoE)/ 54 VDC (PoE+)). The power-consumption field states max. 250 W with 240W PoE, while the published heat output is max. 34. Size and protect the supply according to the manufacturer instructions and the accepted PoE endpoint schedule; do not apply the 12–24 V DC assumption used by non-PoE BRS30/BRS40 variants.
Record both supply inputs when the design uses them, label the sources and verify voltage at the installed equipment. During handover, compare available PoE power with the connected load and retain that baseline. This makes a later endpoint addition a controlled capacity decision rather than an undocumented change. For the BRS32-12TX power review, retain this evidence with part number 942170097 and the complete ordering code.
Reference view for Hirschmann industrial switch sourcing. The pictured configuration may differ from BRS32-12TX.
Use documented management paths with site access rules
Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX lists HTTPS, SSHv2, SNMP v1/v2/v3, LLDP and IPv6 management, with USB-C for local management and device replacement. Choose the methods permitted by the site, establish named administrative responsibility and preserve a recovery path before the unit is connected to the production network.
Save the accepted configuration with a filename that identifies the full product code, location and date. Record later authorized changes. Port mirroring and Syslog are more useful when the monitoring destination and retention process are already defined, and a backup is only useful when personnel can match it to the correct installed switch. For the BRS32-12TX management review, retain this evidence with part number 942170097 and the complete ordering code.
Close the gap between quotation, delivery and installation
When Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX arrives, compare the complete label and part number 942170097 with the accepted quotation. Confirm the switch, separately ordered transceivers or accessories, terminal components and required documentation as individual supply items. A matching front appearance or port count is not sufficient evidence of the same configuration.
- Inspect the housing and DIN rail installation before energizing the device.
- Verify the specified supply voltage and, for PoE models, the accepted powered-device budget.
- Check management access, VLAN membership and expected endpoint communication.
- Retain a configuration backup and final port schedule with the equipment record.
Keep the purchase line tied to the verified model
Send the exact keyword Hirschmann BRS32-08042T2T-SPCY99HHSESXX.X.XX, catalog Type BRS32-12TX, part number 942170097, quantity and delivery destination. Include the powered-device schedule and accepted PoE budget. State any mandatory management, security, timing or redundancy functions and identify required accessories separately.
Ask the supplier to identify the offered code and scope explicitly. For replacement work, attach a readable nameplate image and the key installed-system details. This creates a quotation that can be compared against the engineering requirement without reducing the request to a generic port count. For the BRS32-12TX inquiry review, retain this evidence with part number 942170097 and the complete ordering code.
