Selecting ABB AF09-30-10-13 for compact three-pole motor switching with a wide-range electronic coil

Industrial buyers searching for ABB AF09-30-10-13 usually need three things at the same time: correct product identity, usable technical parameters and a clear boundary around configuration-dependent options. This corrected page addresses those points without repeating administrative tables.

Motor-control duty

Application review for ABB AF09-30-10-13 should start with the actual process or machine duty. Typical use includes direct-on-line starters, panel contactor replacement and coordinated motor-control assemblies. Load current, utilization category, short-circuit coordination and ambient derating must be considered together.

AF09-30-10-13 electrical data

The following table gives the relevant technical profile for ABB AF09-30-10-13. It appears once on this page and separates confirmed family data from configuration-dependent details.

ABB catalog data identifies this configuration as a 3-pole 9 A contactor with a 100...250 V AC/DC coil and one normally open auxiliary contact.

Wide-range coil advantage

ABB AF09-30-10-13 is identified here as a ABB AF series three-pole contactor. The AF09 combines three power poles with an electronically controlled wide-range coil, allowing one coil code to cover a broad AC/DC control-voltage range. It is intended for switching motors and other controlled loads within the published utilization ratings.

Variant codes that must remain distinct

Compatibility for ABB AF09-30-10-13 must be established by function and configuration, not enclosure appearance. AF09-30-10-13 differs from AF09-30-01-13 in the built-in auxiliary contact arrangement. It also differs from coil codes -11, -12 and -14, so the final two-digit coil code must not be omitted.

Motor and panel information for quotation

To obtain a technically comparable offer for ABB AF09-30-10-13, the inquiry should go beyond price and availability. State the supply system, motor kW and full-load current, duty cycle, control voltage, auxiliary-contact requirement and associated overload relay. The quotation should repeat both the type and ABB order code to reduce variant mistakes.

• Keep the complete ABB AF09-30-10-13 phrase on the quotation and purchase order.
• Ask the supplier to identify inclusions, exclusions and the supporting document revision.
• Resolve technical deviations before order release rather than during receiving inspection.

Panel replacement checks

Installation planning for ABB AF09-30-10-13 should protect the existing wiring, process and configuration evidence. Confirm conductor size and torque, coil terminals, mechanical clearance and the condition of adjacent accessories. Functional testing should include coil pickup/dropout, main-pole continuity and auxiliary-contact feedback.

Overload and auxiliary coordination

When alternatives to ABB AF09-30-10-13 are discussed, use nearby families only as comparison points. Compatible motor-starting arrangements may include ABB thermal overload relays and CA4 auxiliary blocks, selected from the current coordination tables for the actual load.

ABB contactor reference image

The image is used as a stock or family reference for ABB AF09-30-10-13. Confirm the delivered label, connectors, housing and included accessories against the approved quotation.

Final order review for ABB AF09-30-10-13

Before release, compare ABB AF09-30-10-13 with the nameplate, current manufacturer data and the installed application. Keep ABB AF09-30-10-13 on the RFQ, supplier offer, purchase order and incoming-inspection record so engineering and procurement review the same item.