Check the 50.4-154 V DC Input Window, 2.8 A Output and Installation Envelope of Hirschmann PC150/110V/54V Part Number 942242001 Before Integrating a 54 V Supply
Hirschmann PC150/110V/54V Part Number 942242001 is a DC/DC converter with a 54 V DC output rated at 2.8 A. Its documented input window is 50.4-154 V DC, and the catalog associates the product with industrial and railway-related requirements.
| Product reference | Hirschmann PC150/110V/54V Part Number 942242001 |
|---|---|
| Converter type | DC/DC, 54 V power output |
| Nominal operating input | 72-110 V DC |
| Input range | 50.4-154 V DC |
| Output | 54 V DC SELV; listed tolerance +1.5% |
| Output current | 2.8 A |
| Connections | 7-pin spring terminal block |
| Temperature | -40 to +70 C |
| Dimensions W x H x D | 160 x 65 x 115 mm |
| Weight / housing protection | 1.4 kg / IP20 |
| Mounting | Wall mounting |
Keep input range and output voltage distinct
The 110 V element in the name of Hirschmann PC150/110V/54V Part Number 942242001 concerns the input side. It should not be confused with the delivered 54 V output. Check the available DC source over its real operating range and match the downstream load to the output specification.
Load planning for Hirschmann PC150/110V/54V Part Number 942242001 starts with the 2.8 A output limit and the connected equipment's transient requirements. A device needing 54 V is not automatically compatible if its startup current, grounding arrangement or permissible supply variation falls outside the intended design.
Hirschmann networking equipment reference photograph. The accessory or power supply described on this page is not represented by an exact product photograph.
Mounting and connections belong in the design
Allow for the 160 x 65 x 115 mm envelope and 1.4 kg mass of Hirschmann PC150/110V/54V Part Number 942242001. The unit is wall-mounted, with IP20 protection. Provide the enclosure environment and clearances required by the installation instructions rather than treating it as an exposed outdoor supply.
- Identify the upstream DC circuit and protection arrangement.
- Check the load current and permitted output voltage.
- Plan wall fixation and access to the seven-pin terminal block.
- Record acceptance measurements before connecting the full application.
Use the applicable product documentation
The catalog for Hirschmann PC150/110V/54V Part Number 942242001 lists EN 50121-4, EN 50155 and EN 45545-2 HL2 among transport-related entries. For a specified project, obtain the applicable manufacturer documentation and confirm its scope for the delivered device and installation.
The listed supply scope of Hirschmann PC150/110V/54V Part Number 942242001 is one device, general safety instructions and one seven-pin terminal block. Include any additional wiring, protection or mounting requirements separately in the project order so that accessory assumptions do not delay assembly.
When sourcing Hirschmann PC150/110V/54V Part Number 942242001, retain part number 942242001 and state the upstream voltage, output load and quantity. Ask the supplier to confirm the offered condition, availability and documentation, then preserve those details with the commissioned power circuit.
Manufacturer specification: Hirschmann PC150/110V/54V Part Number 942242001
