Specify the 1.5-Meter Schuko Version of Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 with the Correct Equipment Input, Socket Arrangement and Service Clearance
Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 is the 1.5-meter Schuko power-cord variant listed for MACH1000, RSPx, RSR and GREYHOUND equipment. Its defined plug type and length make it a distinct purchasing item within the industrial networking accessory range.
| Product reference | Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 |
|---|---|
| Plug designation | Schuko / safety plug |
| Length | 1.5 m |
| Family references | MACH1000, RSPx, RSR, GREYHOUND |
| Mount type | Plug-in device |
| Scope of delivery | Power cable |
| Part number | 942067001 |
Measure the route to the actual socket
Select Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 after measuring the intended cable route rather than the direct distance between the switch and socket. Cable support, connector entry and access for maintenance all use part of the available 1.5 meters.
The Schuko designation on Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 identifies the plug style. Confirm suitability for the installation's socket system and electrical requirements, and compare the device end with the exact power-input version of the host.
Hirschmann networking equipment reference photograph. The accessory or power supply described on this page is not represented by an exact product photograph.
When the shorter cable is useful
A suitable short route for Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 can reduce unnecessary spare cable inside a cabinet. The design still needs adequate movement and disconnection access; a cable pulled tight between fixed points is not an acceptable way to reduce slack.
- Compare the host label and required equipment connector.
- Check the routed distance including supports and bends.
- Keep the plug accessible as required by the equipment instructions.
Distinguish 1.5 meters from 2.5 meters
Part number 942067001 identifies Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001. The 2.5-meter safety-plug cable uses 942067101. List the required length explicitly so an offer cannot silently replace one version with the other.
The catalog scope for Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 is the power cable, with no switch or power module implied. State the number of complete leads required and ask the supplier to confirm cable markings where the application has a specific electrical rating requirement.
Before putting Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001 into service, inspect the plug, device connector and jacket. Installation and electrical checks should follow the host instructions and site procedure, with the part reference retained for later replacement.
Manufacturer specification: Hirschmann Power Cord - Safety Plug, 1.5m Part Number 942067001
