Matching the Separate LD28 Transmitter, Optical Alignment and 25 kHz Switching Requirement When Procuring Pepperl Fuchs LV28-F1/47/82b/105 as a Receiver
Pepperl Fuchs LV28-F1/47/82b/105 identifies the receiver side of a Pepperl+Fuchs LD28/LV28 through-beam set. Manufacturer data describes a 0 to 30 m operating range with a 40 m threshold, visible red light, a 5-pin M12 connection and IP67 protection under stated conditions.
Survey the optical corridor
Before the order is released, Record distance, bracket position and anything that can interrupt or reflect the beam. This gives the team a measurable basis for evaluating Pepperl Fuchs LV28-F1/47/82b/105. It also makes receiving inspection faster because the accepted details are already written into the purchase record.
The shared image for Pepperl Fuchs LV28-F1/47/82b/105 is a reference only and does not prove the supplied configuration.
Confirm both halves of the beam
A reliable maintenance scope should Identify the installed transmitter and receiver labels before ordering one side of the pair. Apply this directly to Pepperl Fuchs LV28-F1/47/82b/105 and record who owns the final technical decision. A similar appearance or shortened model is not enough when wiring, process connection or configured behavior can differ.
Where a parameter depends on the full suffix, require written confirmation for Pepperl Fuchs LV28-F1/47/82b/105 before installation.
| Ordering reference | Pepperl Fuchs LV28-F1/47/82b/105 |
|---|---|
| Function | Receiver for LD28/LV28 through-beam set |
| Operating range | 0 to 30 m under reference conditions |
| Threshold | 40 m published threshold range |
| Switching frequency | 25 kHz |
| Connection and protection | 5-pin M12; IP67 |
Protect alignment mechanically
Commissioning preparation should Check bracket rigidity, vibration and access for cleaning at both ends of the installation. Treat Pepperl Fuchs LV28-F1/47/82b/105 as one part of the complete loop, machine or process assembly. The final acceptance should demonstrate the required behavior under representative operating conditions and retain the result for later service.
Where a parameter depends on the full suffix, require written confirmation for Pepperl Fuchs LV28-F1/47/82b/105 before installation.
Shared reference image for Pepperl Fuchs LV28-F1/47/82b/105. It helps identify the product family; verify the offered full code, nameplate, dimensions and included accessories.
Relate frequency to the moving target
The installation team needs to Use actual object speed and minimum target width when reviewing switching performance. For Pepperl Fuchs LV28-F1/47/82b/105, preserve the result with the asset record instead of relying on memory. If an alternative is proposed, compare it against that same evidence and document every functional difference.
Include condition, quantity, documentation and included accessories in the commercial line for Pepperl Fuchs LV28-F1/47/82b/105.
Accept the set in operation
The first practical check is to Test representative targets across the real path and archive the final alignment evidence. With Pepperl Fuchs LV28-F1/47/82b/105, that check prevents a family description from being mistaken for the exact delivered execution. Keep photographs, drawings and the complete code together so engineering and purchasing compare the same item.
Include condition, quantity, documentation and included accessories in the commercial line for Pepperl Fuchs LV28-F1/47/82b/105.
Verify the electrical handoff
For a useful quotation, Compare connector pinout and output behavior with the input circuit, not only the M12 shell. The review of Pepperl Fuchs LV28-F1/47/82b/105 should connect this evidence to the actual cabinet or process point. Record the present arrangement before removing hardware, and ask the supplier to identify any assumption in its offer.
The shared image for Pepperl Fuchs LV28-F1/47/82b/105 is a reference only and does not prove the supplied configuration.
