Reviewing the 1.1 kW, Three-Phase Supply and Enclosure Codes of Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 Alongside the Motor and Machine Control Requirements
Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 is a complete VLT Midi Drive FC 280 ordering reference. Danfoss type-code information identifies P1K1 as 1.1 kW, T2 as three-phase 200 to 240 V and E20 as IP20/Open. Remaining option positions should be confirmed as part of the offered configuration.
The machine determines the control method
Describe how Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 receives a speed command and how the machine requests start, stop and other required states. Preserve the existing parameter record and interface details.
For Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0, identify whether an offered option change affects the control wiring or communication arrangement. A supplier’s general FC 280 description should not replace a comparison of the actual configured product.
Small drive, specific supply
Before selecting Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0, verify the actual incoming supply and motor nameplate. The T2 designation should not be confused with a single-phase input simply because the installation uses a familiar voltage class.
Compare motor current and the intended duty when evaluating Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0. A power-size match alone does not establish suitability for repeated acceleration, demanding load cycles or site-specific derating conditions.
A controlled restart
Commissioning of Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 should follow the manufacturer’s procedure and the site’s machine controls. Preserve the motor data and approved settings before the old unit is removed. The responsible team should verify the required command and feedback behavior before production resumes. An accepted installation of Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 is evidenced by the actual configured machine response, not only by the drive powering up without a fault.
| Ordering reference | Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 |
|---|---|
| Drive family | VLT Midi Drive FC 280 |
| P1K1 code | 1.1 kW power size |
| T2 code | 3 x 200 to 240 V AC supply |
| E20 code | IP20 / Open |
| Additional positions | Confirm filter, brake, control and other selected options |
| Application basis | Motor current, duty and cabinet environment |
Open enclosure in a planned cabinet
- The E20 enclosure code of Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 needs to be considered with the cabinet, cooling and access arrangements. Compare mounting space, wire approach and service clearance against the applicable drawing.
- State which installation accessories are expected with Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 and which are retained from the machine. The shared Danfoss image is a brand reference and does not establish the enclosure or option details of this unit.
Shared reference image for Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0. The supplied list associates this brand stock image with the request; it is not a photograph confirming the exact model, configuration or accessories offered.
Keep every option position on the offer
Request Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 in full, including the final A0 reference, and ask for offered-item identification. Confirm condition, included panel or accessories and available documentation. Any proposed alternative should show the differences that affect the machine. Archive the approved offer and final configuration for Danfoss FC-280P1K1T2E20H2BXCXXXSXXXXA0 with the machine asset so the next service request begins with a dependable record.
