Hirschmann BRS30-0804OOOO-STCZ99HHSES Managed BOBCAT Industrial Ethernet Switch with 8 Copper Ports and 4 Gigabit SFP Uplinks
September
09, 2026
Network design and procurement review for Hirschmann BRS30-0804OOOO-STCZ99HHSES in TSN-ready DIN-rail switching, copper access and fiber uplink projects
Hirschmann BRS30-0804OOOO-STCZ99HHSES is a configured Hirschmann BOBCAT managed industrial Ethernet switch reference for DIN-rail networks that need copper device access and fiber uplinks in one compact platform. This page is organized around a network design decision rather than a generic feature list, so engineering, maintenance and purchasing can evaluate the same evidence.
The official Belden configurator record associated with Hirschmann BRS30-0804OOOO-STCZ99HHSES describes a fanless managed switch with 12 ports in total: eight 10/100BASE-TX RJ45 ports and four fiber positions provided as 100/1000 Mbit/s SFP slots. The complete released code and software suffix should still be confirmed on the quotation and nameplate before an order is approved.
Reference image for Hirschmann BRS30-0804OOOO-STCZ99HHSES. The shared picture supports Hirschmann industrial-networking product recognition; final selection should follow the complete BOBCAT order code, nameplate and current Belden documentation.
Buyer snapshot: what the base code tells the project
| Design item | Official configured-family information | Buyer action |
|---|---|---|
| Switch role | Managed industrial Ethernet switch for DIN-rail installation with fanless construction. | Confirm that Hirschmann BRS30-0804OOOO-STCZ99HHSES is intended for the correct cabinet, topology and control-network zone. |
| Copper access | Eight 10/100BASE-TX RJ45 ports are listed for the BRS30-0804 configuration. | Map every PLC, remote I/O, HMI, drive or service connection before purchase. |
| Fiber uplinks | Four SFP slots support 100/1000 Mbit/s fiber modules in the configured data sheet. | Specify the SFP type, fiber mode, wavelength, connector, distance and optical budget separately. |
| Local interface | USB-C is listed for local management and device replacement functions. | Confirm the site's approved service method and compatible configuration accessory. |
| Power | The configured family data lists redundant 12 to 24 VDC inputs and approximately 9 W consumption. | Verify the exact supply tolerance, terminal block, protection and alarm-contact wiring. |
The table gives a defensible starting point for Hirschmann BRS30-0804OOOO-STCZ99HHSES, but it does not replace the generated technical data sheet for the complete suffix. Temperature class, approvals, software package, security options and accessories should be taken from the current configurator output supplied with the offer.
Build the port map before requesting a price
A useful inquiry for Hirschmann BRS30-0804OOOO-STCZ99HHSES starts with a port map. Allocate the eight copper ports to named field or control devices, then reserve the four SFP positions for ring links, control-room uplinks, remote cabinets or future expansion. This exposes oversubscription and redundancy questions before hardware arrives.
Place Hirschmann BRS30-0804OOOO-STCZ99HHSES on the approved network drawing and assign its cabinet and asset tag.
List each copper endpoint, negotiated speed, VLAN or traffic class and operational owner.
Define every fiber link with SFP model, fiber type, wavelength, connector, route length and loss budget.
Choose the required ring or redundancy behavior and identify both physical paths.
Reserve management addressing, time synchronization, logging and configuration-backup destinations.
Record spare ports and the condition under which future devices may use them.
This port-allocation exercise is especially important for Hirschmann BRS30-0804OOOO-STCZ99HHSES because an empty SFP slot is not a complete optical interface. The transceiver and fiber plant must be compatible at both ends, and the selected module must be supported by the active Hirschmann software and hardware configuration.
Traffic timing and TSN expectations
The BOBCAT platform is promoted for real-time industrial communication and Time-Sensitive Networking development. A buyer should not treat that statement as proof that every TSN feature is active in Hirschmann BRS30-0804OOOO-STCZ99HHSES. Confirm the installed HiOS release, licensed feature set, endpoint support, timing design and project test plan.
If Hirschmann BRS30-0804OOOO-STCZ99HHSES will carry ordinary supervisory traffic rather than scheduled real-time streams, document that too. Clear expectations prevent unnecessary configuration complexity and make acceptance testing more focused.
Configuration and security baseline
Replace default credentials and assign named administrative responsibility.
Disable unused services and unused ports according to the approved network policy.
Define management VLANs, access control, SNMP or event reporting, and secure time synchronization.
Record the exact HiOS version and review the applicable release notes before upgrading.
Export a known-good configuration and store it with the asset, firmware and network drawings.
Test recovery and device-replacement procedures before the switch becomes production-critical.
For Hirschmann BRS30-0804OOOO-STCZ99HHSES, the configuration backup is part of the spare strategy. A physically compatible replacement does not restore VLANs, redundancy, security policy or monitoring until the approved configuration is loaded and validated.
Acceptance test written for the installed network
| Test stage | Evidence to capture | Pass condition |
|---|---|---|
| Identity | Nameplate, serial number and full Hirschmann BRS30-0804OOOO-STCZ99HHSES configuration | Hardware and suffix agree with the order. |
| Power | Both supply paths, alarm contact and restart sequence | No unexpected interruption or alarm behavior. |
| Copper | Link, speed, error counters and endpoint traffic for all assigned RJ45 ports | Every mapped device communicates as designed. |
| Fiber | SFP identity, optical levels where available, link status and path test | Both ends agree and margin is acceptable. |
| Redundancy | Controlled path interruption and recovery timing | Recovery meets the approved network requirement. |
| Management | User access, logging, time, backup and restore | The support team can operate and recover the switch. |
Acceptance for Hirschmann BRS30-0804OOOO-STCZ99HHSES should include counter review after a realistic traffic period. A green link LED can coexist with duplex problems, marginal optics, incorrect VLAN membership or intermittent errors that only appear under load.
Replacement and migration questions
Hirschmann BRS30-0804OOOO-STCZ99HHSES may be considered when replacing an older RS-series or another BOBCAT switch, but similarity in port count does not prove drop-in compatibility. Compare mounting space, terminals, supply, fiber modules, temperature limits, approvals, configuration syntax, redundancy protocol and management workflow.
When the old switch is still running, export its configuration and collect screenshots, cable labels, MAC tables, VLANs, redundancy settings and alarm wiring before installing Hirschmann BRS30-0804OOOO-STCZ99HHSES. Keep a rollback route until the new switch has passed the production observation period.
Evidence boundary for the long order code
The exact phrase Hirschmann BRS30-0804OOOO-STCZ99HHSES should be carried through the search, quotation and purchase order. Do not silently replace letters that look like zeros or add a software suffix from another listing. Ask the supplier for the complete generated data sheet and a photograph of the offered label.
This News page uses official configured-family information to describe Hirschmann BRS30-0804OOOO-STCZ99HHSES without inventing unverified approval or option details. The final commercial offer should identify deviations, included terminal blocks, SFP modules, software level, documentation and warranty condition.
Hirschmann BRS30-12TX (Product code: BRS30-08042T2T-STCY99HHSESXX.X.XX)
Hirschmann BRS30-12TX-EEC (Product code: BRS30-08042T2T-TTCY99HHSESXX.X.XX)
Hirschmann BRS30-16TX/4SFP (Product code: BRS30-1604OOOO-STCY99HHSESXX.X.XX)
Hirschmann BRS30-16TX/4SFP-2A (Product Code: BRS30-1604OOOO-STCY99HHSEAXX.X.XX)
Hirschmann BRS30-16TX/4SFP-EEC (Product code: BRS30-1604OOOO-TTDY99HHSESXX.X.XX)
Hirschmann BRS30-16TX/4SFP-EEC-2A (Product Code: BRS30-1604OOOO-TTDY99HHSEAXX.X.XX)
Hirschmann BRS30-20TX (Product code: BRS30-16042T2T-STCY99HHSESXX.X.XX)
Hirschmann BRS30-20TX-EEC (Product code: BRS30-16042T2T-TTDY99HHSESXX.X.XX)
Hirschmann BRS30-20TX/4SFP (Product code: BRS30-2004OOOO-STCY99HHSESXX.X.XX)
Hirschmann BRS30-20TX/4SFP-2A (Product Code: BRS30-2004OOOO-STCY99HHSEAXX.X.XX)
Hirschmann BRS30-20TX/4SFP-EEC (Product code: BRS30-2004OOOO-TTDY99HHSESXX.X.XX)
Hirschmann BRS30-24TX (Product code: BRS30-20042T2T-STCY99HHSESXX.X.XX)
Hirschmann BRS30-24TX-EEC (Product code: BRS30-20042T2T-TTDY99HHSESXX.X.XX)
Hirschmann BRS30-8TX/4SFP (Product code: BRS30-0804OOOO-STCY99HHSESXX.X.XX)
Hirschmann BRS30-8TX/4SFP-2A (Product Code: BRS30-0804OOOO-STCY99HHSEAXX.X.XX)
Hirschmann BRS30-8TX/4SFP-EEC (Product code: BRS30-0804OOOO-TTCY99HHSESXX.X.XX)
Hirschmann BRS30-8TX/4SFP-EEC-2A (Product Code: BRS30-0804OOOO-TTCY99HHSEAXX.X.XX)
Hirschmann BRS30-8TX/4SFP-EEC-HL (Product code: BRS30-0804OOOO-TTCX99HHSESXX.X.XX)
Hirschmann BRS30-8TX/4SFP-HL (Product code: BRS30-0804OOOO-STCX99HHSESXX.X.XX)
Search and quotation summary
Industrial buyers may search for Hirschmann BRS30-0804OOOO-STCZ99HHSES as a Hirschmann BRS30 BOBCAT switch, BRS30-8TX/4SFP managed switch, DIN-rail Gigabit uplink switch, TSN-capable industrial Ethernet switch or RS30 migration option. These related phrases improve discovery while {kw} remains the controlled product identity.
For a focused quotation, send HKXY Tech Hirschmann BRS30-0804OOOO-STCZ99HHSES, quantity, destination, required delivery date, installed topology, power arrangement, SFP list, environmental conditions and required certificates. Final acceptance of {kw} should follow the complete current Belden/Hirschmann data sheet and the buyer's approved network design.