Plan four Gigabit copper paths and host-slot compatibility around Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99
Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99, part number 942077004, is the Hirschmann MSM40-4TX industrial networking configuration described in the captured manufacturer record. This media module adds four fixed 10/100/1000BASE-TX RJ45 interfaces to a compatible MSP modular switch. Selection depends on the host chassis and slot plan as much as on the four copper connectors.
Keep module and host identities in one record
Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 is the complete media-module reference for catalog Type MSM40-4TX and part number 942077004. Keep the module code, compatible MSP host and slot position together in the inquiry, inspection record and equipment register. A generic four-port description cannot prove the same medium or conformity selection.
- Match the complete module label.
- Record the host switch and slot.
- Keep cable or SFP references with the module.
- List accessories separately.
Assign every RJ45 interface before installation
The captured record for Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 lists four 10/100/1000BASE-TX RJ45 ports. Assign each destination, expected rate, network role and cable identifier before installation. Identical connectors should not become an excuse for an undocumented live-port arrangement.
During acceptance, verify negotiation and application communication from both ends. Preserve the normal state with Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 and part number 942077004, so a later service visit can distinguish cable, peer, host-slot and module issues.
Build one evidence pack for the exact configuration
The working evidence pack for Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 should contain the offered label, part number 942077004, current manufacturer document revision, approved interface schedule and any project-specific acceptance record. Keep confirmed values separate from assumptions carried over from a nearby family member.
Photographs, configuration backups and test results become more useful when they are indexed by the complete Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 code and installed location. This makes quotation review, delivery inspection and later technical support refer to the same hardware definition.
| Complete product code | Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 |
|---|---|
| Catalog Type | MSM40-4TX |
| Part Number | 942077004 |
| Port / media summary | Port 1: 10/100/1000BASE-TX, RJ45; Port 2: 10/100/1000BASE-TX, RJ45; Port 3: 10/100/1000BASE-TX, RJ45; Port 4: 10/100/1000BASE-TX, RJ45 |
| Operating voltage | Power supply via the backplane of the MSP switch |
| Power consumption | 3 W |
| Operating temperature | 0-+60 °C |
| Dimensions / weight | 38 mm × 133 mm × 118 mm / 193 g |
| Protection | IP20 |
Backplane power makes host compatibility essential
The voltage entry for Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 states: Power supply via the backplane of the MSP switch. The module relies on a compatible MSP backplane rather than a separate field supply. Check host model, slot support, module combination and chassis power before procurement.
Record the installed host and slot after commissioning. That pairing is part of the usable identity of Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99; replacing only the visible module without checking the platform can produce an avoidable compatibility problem.
Hirschmann industrial networking reference image for MSM40-4TX; confirm the delivered unit from its complete code and label.
Plan slot space, connectors and service access together
Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 is listed at 38 mm × 133 mm × 118 mm, 193 g and IP20 protection. Those values describe the module, but service clearance also depends on neighboring modules, the host enclosure and connected cables.
Check connector handling and removal access before assigning the slot. The host cabinet supplies the practical environmental boundary, so the module-level rating for Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 is not a complete panel assessment.
Commission each module path from both ends
Commission every active interface on Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 with its actual peer. Record expected rate, link state, cable or SFP reference, application communication and the host slot. High-speed optical links should also retain the module at each end and the installed path.
Tie the results to part number 942077004 and the full Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 code. A fault can then be compared with a known baseline before a working media module is replaced unnecessarily.
Separate the base product from optional supply items
Clarify whether the quotation for Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 covers only the base module or switch, or also includes media modules, SFPs, terminal accessories, configuration services and project documents. Similar catalog descriptions can hide materially different supply scopes.
List each required accessory and deliverable as a separate line, then compare the offer with part number 942077004. This prevents the apparent availability of Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 from being mistaken for a complete, installation-ready network package.
Prepare a configuration-specific module inquiry
Request Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99, catalog Type MSM40-4TX, part number 942077004, quantity and delivery date. State the MSP host, intended slot, current module population and every planned connection. For SFP versions, include module, fiber and far-end details.
Ask the supplier to identify the exact offered code and included accessories. A configuration-specific inquiry for Hirschmann MSM40-T1T1T1T1SY9HH9E99.9.99 is easier to compare than a request for an unnamed MSP expansion module.
