Use Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX to separate local Gigabit copper demand from 2.5G-capable fiber uplinks
Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX, part number 942170069, is the Hirschmann BRS50-16TX/4SFP configuration described in the captured manufacturer record. Sixteen local Gigabit links and four SFP positions capable of up to 2.5 Gbit/s support a compact aggregation design. Optical modules and fiber paths must still be selected independently of the switch chassis.
The 2.5G-capable slots do not choose the optics
The SFP positions on Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX are listed for 100/1000/2500 Mbit/s, but an empty slot does not define wavelength, connector, fiber type, reach or far-end compatibility. Specify the transceiver at both ends and assess the installed optical path. Keep switch and SFP modules as separate purchasing lines.
During commissioning, record module reference, destination, rate and normal indication for every optical link. This lets service teams distinguish a module, fiber, peer or configuration issue. Store the schedule with Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX and part number 942170069.
Reserve growth without hiding present network demand
For Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX, separate installed endpoints, infrastructure links, maintenance access and approved future growth. A physically empty interface is not automatically spare capacity if power, upstream traffic, fiber modules or cabinet space have not been reviewed.
- Count endpoint and inter-switch links separately.
- Document expected traffic on shared paths.
- Reserve cable and connector access for planned growth.
- Update the Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX schedule after each authorized expansion.
| Complete product code | Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX |
|---|---|
| Catalog Type | BRS50-16TX/4SFP |
| Part Number | 942170069 |
| Port / media configuration | 20 Ports in total: 16x 10/100/1000BASE TX / RJ45; 4x 100/1000/2500Mbit/s fiber ; 1. Uplink: 2 x SFP Slot (100/1000/2500 Mbit/s) ; 2. Uplink: 2 x SFP Slot (100/1000/2500 Mbit/s) |
| Operating voltage | 2 x 12 VDC ... 24 VDC |
| Power consumption | 17 W |
| Operating temperature | 0-+60 |
| Dimensions / weight | 109 mm x 138 mm x 115 mm / 950 g |
| Housing / mounting | PC-ABS / DIN rail |
| Protection | IP30 |
Map shared traffic before applying network controls
Before deploying Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX, identify controller traffic, multicast sources, monitoring flows, management access and any uplink that carries several downstream devices. This makes VLAN, QoS, storm control and multicast settings responses to a documented communication need rather than isolated feature choices.
Test representative application exchanges and observe the links that concentrate traffic. Save the results with the port map and accepted Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX configuration so later expansion can be assessed against a known capacity baseline.
Hirschmann industrial networking reference image for BRS50-16TX/4SFP; confirm the delivered configuration from the complete code and label.
Choose management and backup paths before production use
Choose the permitted management methods for Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX, identify administrative ownership and decide where configuration backups, logs and change records will be retained before production connection. The management path should remain available during controlled commissioning without becoming an undocumented permanent exception.
Name every saved file with the complete Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX code, location and date. After an authorized change, update the configuration and port schedule together so a later restore cannot accidentally use a file from a visually similar switch.
A useful handover survives the next service visit
The Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX handover should include cable destinations, management address, software information, configuration backup, fitted SFP list and results of required communication and recovery tests. Identify reserved ports and store the records under the installed location and part number 942170069.
A future service team should understand the expected network state without reconstructing the project. Update the Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX record whenever an endpoint, VLAN, optical module, PoE allocation or redundancy setting changes.
Information that belongs in the quotation request
Send Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX, catalog Type BRS50-16TX/4SFP, part number 942170069, quantity and delivery destination in the inquiry. Include SFP references, fiber type, connector, far-end interface and quantities. State operating environment, endpoint power, management, security and redundancy requirements where they affect acceptance. List accessories separately.
Ask the supplier to show the exact offered code and applicable document revision for Hirschmann BRS50-00202Q2Q-STCY99HHSESXX.X.XX. For replacement work, attach the installed label and summarize functions that must be retained. This is easier to compare than a generic request for an industrial Ethernet switch.
