Pepperl Fuchs LV28-F1-3974/47/82b/112 in a Through-Beam Detection Pair: Checking the Opposite Emitter, Optical Path and Receiver Delivery Scope
The Pepperl Fuchs LV28-F1-3974/47/82b/112 designation identifies the receiver in the manufacturer’s LD28/LV28-F1-3974/47/82b/112 through-beam system documentation. That distinction is important for purchasing: a receiver line does not automatically include the emitter. Describe the installed pair and the detection task before comparing a replacement offer with the existing equipment.
Receiver versus complete pair
An offer responding to Pepperl Fuchs LV28-F1-3974/47/82b/112 should name the delivered component clearly. Some catalogue material describes the complete LD28/LV28 system, while the requested LV28 code is the receiver. Compare scope before comparing price. If both devices are wanted, list that requirement explicitly; if the existing emitter will remain, document its identity for the technical review.
Look across the machine
For Pepperl Fuchs LV28-F1-3974/47/82b/112, identify the sensor on the opposite side of the detection path. Photograph its label as well as the receiver label. A beam path can contain guards, moving equipment or accumulated contamination that affects detection independently of the receiver. Recording the physical arrangement helps separate a component request from a broader machine problem.
| Requested product | Pepperl Fuchs LV28-F1-3974/47/82b/112 |
|---|---|
| Requested component | LV28 receiver of the documented through-beam pair |
| Paired emitter reference | LD28-F1-3974/76a/112 in manufacturer documentation |
| Connector reference | M12, five-pin arrangement in the system sheet |
| Supply boundary | Receiver alone unless the quotation explicitly includes a pair |
Optical alignment has a mechanical context
When assessing Pepperl Fuchs LV28-F1-3974/47/82b/112, retain the mounting position, bracket condition and route of the beam. A replacement that is mounted differently can change the practical detection task. Include target size and movement in the machine review. The Pepperl Fuchs LV28-F1-3974/47/82b/112 spare request should remain tied to the existing application until any altered geometry has been evaluated by the responsible team.
Signals at the connector
Use the matching system documentation and machine drawing to check the Pepperl Fuchs LV28-F1-3974/47/82b/112 connection arrangement. Record which outputs or diagnostic signals the controller actually uses. A connector that fits is only a mechanical observation, not proof that every conductor serves the same function. Keep the receiver’s full suffix in the technical comparison so a nearby output variant is not mistaken for the requested part.
Shared reference image associated with Pepperl Fuchs LV28-F1-3974/47/82b/112. This image does not establish the exact offered configuration or included accessories; use the quotation and actual item identification for those details.
Receiving and machine handover
Inspect the optical face, connector and readable marking when Pepperl Fuchs LV28-F1-3974/47/82b/112 arrives. Retain actual-item photographs with the purchase record. The shared image associated with this listing is illustrative and does not define the shipment. After a Pepperl Fuchs LV28-F1-3974/47/82b/112 change, the site’s qualified team should verify the required machine detection behavior using its approved procedure before the equipment returns to normal production.
Send both labels with the enquiry
Specify Pepperl Fuchs LV28-F1-3974/47/82b/112, quantity and the delivery requirement, and attach the existing emitter identification. This lets the supplier address the receiver request precisely. Any proposed pair replacement should be shown separately from the exact Pepperl Fuchs LV28-F1-3974/47/82b/112 spare offer.
