Checking load duty, control power and the accessory schedule before ABB AF65-30-00-13 enters a motor starter bill of materials
ABB AF65-30-00-13 is a three-pole ABB contactor identified by product number 1SBL387001R1300. The listed control range is 100–250 V AC/DC, while the 400 V AC-3 motor rating is 30 kW. Its base contact arrangement has three normally open main poles and no built-in auxiliary contacts. Selection should retain the distinction between motor duty and control-circuit voltage.
Ratings with their operating context
| Item to compare | Product information and required confirmation |
|---|---|
| Exact contactor | ABB AF65-30-00-13 |
| ABB reference | 1SBL387001R1300 |
| AC-3 duty at 400 V | 65 A; 30 kW |
| Coil range | 100–250 V AC, 50/60 Hz, or DC |
| Contact arrangement | 3 main NO; 0 auxiliary NO and 0 auxiliary NC |
| Connection | Screw terminals |
| AC-1 comparison | 105 A at 690 V and 40 °C; different utilization duty |
Read the load line first
When specifying ABB AF65-30-00-13, write down the motor voltage and the operating duty alongside the motor rating. Starting, reversing and frequent inching are different demands on switching equipment.
The higher AC-1 figure in the catalogue must not be treated as an AC-3 motor rating. Use the applicable duty table when the proposed load differs from the stated 400 V motor example.
Which contacts actually belong in the box?
- The base ABB AF65-30-00-13 contactor does not supply auxiliary feedback contacts.
- List the feedback and interlock functions shown on the schematic and establish the compatible accessory references separately.
- An assembled spare removed from a panel can carry extra blocks that the original purchase description omitted.
- For ABB AF65-30-00-13, make the quoted assembly explicit before comparing prices from different suppliers.
Shared reference image supplied for the ABB AF65-30-00-13 inquiry; the pictured equipment does not confirm the exact model or delivered configuration.
Control power during pickup and operation
The coil range of ABB AF65-30-00-13 helps identify the required suffix, but the panel control supply must still be documented. Record AC or DC operation and the nominal voltage at the control circuit.
Keep the coil circuit separate from the main load description in the bill of materials. This makes a proposed alternate coil code easy to detect during review.
Coordination stays with the starter design
Evaluate ABB AF65-30-00-13 with the overload relay, upstream protection and enclosure arrangement already approved for the motor. The contactor reference alone does not define the short-circuit performance of an assembled starter. A replacement project should preserve the coordination record or obtain an engineering review where other components change. Capture terminal access and conductor routing before finalizing the hardware order.
Neighboring frame sizes need a new comparison
AF52 and AF80 references can appear beside ABB AF65-30-00-13 in searches, but the purchaser should compare duty, dimensions and accessories individually. A larger number does not automatically improve a constrained panel installation. Any proposed replacement for ABB AF65-30-00-13 should identify mounting differences, coil requirements and the auxiliary configuration so that the maintenance team can estimate the actual installation scope.
Warehouse identification for a future shutdown
Label the stored ABB AF65-30-00-13 spare with the equipment group it serves and retain the approved accessory list. At receipt, compare the manufacturer reference and coil marking with the quotation. A shared catalogue image is insufficient to establish the supplied assembly. This short identification record helps avoid issuing a bare unit when the scheduled job expects a complete starter contactor assembly.
