Relating the switched load, control supply and existing power connections to ABB AF265-40-00-13 for a four-pole contactor purchase
ABB AF265-40-00-13 is a four-pole AF contactor reference. ABB identifies this version with four normally open main contacts and a 100–250 V AC/DC control range. A useful purchase specification also states the actual load duty and enclosure conditions, because a contactor cannot be selected from its model number or a single headline current alone.
Published contactor identity
| Review item | Documented value or confirmation needed |
|---|---|
| Exact selection | ABB AF265-40-00-13 |
| ABB product ID | 1SFL547102R1300 |
| Main poles | 4 normally open contacts |
| Control circuit | 100–250 V AC, 50/60 Hz, or DC |
| Mounted auxiliaries | 0 NO and 0 NC in the listed base configuration |
| Load rating | Select from ABB ratings for voltage, duty and ambient temperature |
Describe the four switched conductors
A replacement request for ABB AF265-40-00-13 should explain the role of every main pole in the existing circuit. Preserve the power drawing and conductor identification rather than relying on a photograph of the front label. The intended load and switching frequency determine which manufacturer rating is relevant. Document those conditions before treating an AF265 designation as proof of suitability for a different duty.
Control voltage is a separate circuit decision
Check the supply that actually reaches ABB AF265-40-00-13 during operation, including whether it is AC or DC. The published wide-range coil selection is useful only when the installed circuit falls within its stated conditions.
Record any interposing relay and control wiring arrangement. This gives the panel builder a clear comparison of the replacement coil demand and the command circuit that must operate it.
Reference image for ABB AF265-40-00-13; the shared illustration does not establish the delivered options or included accessories.
Make room for bars, lugs and tools
The installed connections around ABB AF265-40-00-13 need enough space for the approved conductors and termination hardware. Compare the manufacturer outline with the cabinet drawing, then check access for fastening and inspection. A dimensional fit at the mounting plate does not settle busbar alignment or cable bending. Include existing terminal accessories in the scope, and confirm whether the offered contactor includes them.
List auxiliary feedback explicitly
The base configuration of ABB AF265-40-00-13 does not include the mounted auxiliary contacts listed as zero in the product data. If the machine uses status feedback or an interlock, identify the required auxiliary arrangement separately.
Check the circuit diagram against the installed accessories. This avoids discovering during assembly that the main contactor matches while the feedback circuit still lacks a necessary component.
Review the assembly after a failure
- When ABB AF265-40-00-13 is ordered because the previous unit failed, retain the maintenance findings with the purchase request.
- The condition of the surrounding connections and the nature of the load are relevant to the replacement assessment.
- The responsible engineer should review protection coordination and the intended switching duty.
- Purchasing an identical label does not by itself explain or resolve the reason for the earlier damage.
Compare nearby references by the changed feature
AF265 versions with other coil suffixes or auxiliary arrangements should be compared feature by feature with ABB AF265-40-00-13. Keep any proposed alternative on a separate line with its differences stated.
For receipt inspection, request label evidence, condition and accessory details. The final acceptance record should link the delivered reference to the approved panel drawing, not just to an abbreviated AF family description.
Supporting document: product information used for this selection review.
