Buyer reference for Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch searches, covering 1000BASE-EX LC optics, 40 km single-mode fiber range and MTS switch spare planning

 

Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch is a common buyer-style search phrase for the Hirschmann MTS-SFP-1G-LX+/LC 1G SFP transceiver module. Although the phrase includes Switch, the purchasing object is the optical SFP module used with compatible Hirschmann MTS or Mammuthus switch configurations.

 

For Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch, buyers normally want to confirm optical reach, LC connector type, single-mode fiber requirement, DDMI diagnostics and whether the transceiver fits the installed Hirschmann switch platform.

 

Reference image for Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch. The image is used for product-family recognition; final matching should follow the exact SFP model code and switch compatibility list.

 

Search Intent and Product Identity

Exact buyer keyword	Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch
Manufacturer context	Hirschmann IT / Belden industrial networking accessory
Product number	MTS-SFP-1G-LX+/LC
Product type	1G SFP optical transceiver module for switch fiber ports
Typical buyer wording	40km switch SFP, long-haul LC fiber module, Hirschmann MTS switch spare
CMS category	Product News
Reference image	3777b0ce0847c880.png

 

Optical and Network Parameters

Ethernet interface	1000BASE-EX with LC connector
Data rate	1 Gbps
Fiber type	Single-mode fiber
Wavelength	1310 nm
Connector	LC
Transmission distance	10 to 40 km
Link budget note	Less than 22 dB link budget at 1310 nm, with 0.32 dB/km attenuation and 3 dB reserve in the official specification context
Diagnostics	DDMI, including optical input/output power, temperature, bias current and voltage monitoring

 

This parameter view helps separate Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch from the 20 km LX/LC version, 1550 nm LX+/LC-1550 version and other Hirschmann SFP options that may look similar in a short search result.

 

Electrical and Environmental Details

Operating voltage	+3.3 V
Power consumption	Less than 1 W
Operating temperature	0 to +70 deg C
Module family	Hirschmann IT 1G SFP module
Active product status	Listed as active in Belden product information
Revision note	Official product information shows revision data dated 05-23-2024

 

Why Buyers Search It as a Switch Item

Many procurement teams type Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch because the SFP module is purchased for a switch port replacement or a new Hirschmann switch configuration. In quoting, it is better to call out the module code MTS-SFP-1G-LX+/LC and the 40 km optical requirement together.

 

• Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch may be searched by buyers replacing a failed fiber uplink module.

• It may also appear in a switch bill of material where the chassis, power supply and SFP modules are listed separately.

• The 40 km reach matters for long-haul single-mode fiber links between plant areas, utility rooms, control rooms or remote cabinets.

• The LC connector and 1310 nm wavelength should be checked before the module is accepted as a match.

 

Compatibility Checks Before Purchase

Installed switch model	Confirm the exact Hirschmann MTS or Mammuthus switch model and SFP port requirement.
Fiber distance	Measure or confirm the actual fiber route distance and loss budget.
Fiber cable	Confirm single-mode 9/125 um fiber instead of multimode fiber.
Connector type	Confirm LC connector at both ends or prepare the correct patch cable.
Optical pair	Make sure both link ends use compatible wavelength, reach and duplex mode.
Diagnostics requirement	Confirm whether DDMI monitoring is required by the maintenance team.
Temperature condition	Check cabinet temperature because this module is specified for 0 to +70 deg C operation.

 

These checks make Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch easier to quote accurately because the same Hirschmann switch project may use short-reach SX modules, 20 km LX modules, 40 km LX+ modules or 80 km LH modules depending on the fiber route.

 

Related Model Names Often Compared

MTS-SFP-1G-LX/LC	1G single-mode 1310 nm LC module commonly associated with 20 km reach.
MTS-SFP-1G-LX+/LC	The 40 km 1310 nm LC version used in this page.
MTS-SFP-1G-LX+/LC-1550	40 km version using 1550 nm wavelength; do not mix it with the 1310 nm version without checking both link ends.
MTS-SFP-1G-LH/LC	Longer-distance model family often reviewed for 80 km links.

 

Inquiry Data That Speeds Up Quotation

• Keep the complete phrase Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch in the inquiry subject.

• Send the installed Hirschmann switch model and port location if available.

• Confirm fiber type, route distance, connector type and current transceiver label.

• State whether the request is for one spare SFP module, a switch configuration, or multiple project links.

• Provide quantity, destination country, required delivery time and any document/certificate needs.

 

When Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch is requested with clear optical-link data, HKXY Tech can review the model code and supply context faster. The page is also structured to help Google and AI search systems understand the exact Hirschmann SFP module, buyer intent and industrial network use case.

 

HKXY Tech News Note

HKXY Tech lists Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch for industrial networking buyers who need exact-code sourcing, switch accessory matching and spare-parts planning support. The reference image is for recognition, while the final match should follow the official product number and site compatibility data.

 

For a faster response, send Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch, the required quantity, old module label photo, installed switch model, fiber distance and delivery destination.

 

The product picture is used as a stock/reference image for Hirschmann MTS-SFP-1G-LX+/LC (40km) Switch. Final selection should be confirmed against the complete Hirschmann/Belden model code and switch configuration.